Double Side PCB Brushing Deburring Machine (GE-GBD650)
Four pairs of #500 / #300 rollers at 1280 rpm with double spraying rinse — 650 mm working width, plate thickness 0.15 – 3.2 mm. Clears drill burr from both the panel surface and the hole walls in a single pass.
Double Side PCB Brushing Deburring Machine (GE-GBD650)
GE-GBD650 is built for drill-burr removal on double-sided and multilayer PCB after CNC drilling. Sits between the PCB brushing machine and PTH plating. The four pairs of high-speed rollers clear both the panel surface and the hole walls.
GE-GBD650 — full specifications
| Parameter | Value |
|---|---|
| Model | GE-GBD650 |
| Power | 12 kW / 380 V / 50 Hz |
| Working width | 650 mm |
| Plate thickness | 0.15 – 3.2 mm |
| Brushing roller length | 700 mm |
| Brush model | #500 / #300 — 4 sets |
| Brushing roller OD / ID | Ø105 mm / Ø32 mm |
| Oscillation stroke | 15 mm |
| Brushing speed | 1280 rpm |
| Brushing motor (per roller) | 1.5 kW |
| Rinse | Double spraying rinse (DI water) |
| Machine size (L × W × H) | 6500 × 1250 × 1000 mm |
| Weight | 750 kg |
Where it fits & related machines
GE-GBD650 FAQ
GE-GBD650 is a double-side PCB brushing deburring machine designed to remove drill burr from the copper surface and hole walls of PCB after CNC drilling. The four pairs of high-speed rollers clear both sides of the panel in a single pass.
GE-GBD650 rollers spin at 1280 rpm. The high rotation speed is what allows the brushes to clear hole-wall burr, not just surface burr.
GE-GBD650 handles PCB from 0.15 mm (flex and thin multilayer) up to 3.2 mm (thick backplane and heavy-copper).
GE-GBD650 draws 12 kW total from a 380 V / 50 Hz three-phase supply — 1.5 kW per brushing roller across four pairs, plus the conveyor drive.
Yes. GE-GBD650 has a built-in double spraying rinse station fed with DI water to flush removed burr and debris off the panel before the next station.
Yes — the four pairs of rollers clean both the panel surface and the hole walls in one pass. For the highest surface finish quality, pair it with the GE-GB650 brushing machine upstream.
GE-B650 removes surface dust and oxide (brush + grind). GE-GBD650 specifically targets drill burr — both surface and hole-wall — at higher roller speed. They are complementary, not interchangeable.